diff --git a/examples/SX126x/SX126x_Receive/SX126x_Receive.ino b/examples/SX126x/SX126x_Receive/SX126x_Receive.ino
index 36169ef0..8cbec6cc 100644
--- a/examples/SX126x/SX126x_Receive/SX126x_Receive.ino
+++ b/examples/SX126x/SX126x_Receive/SX126x_Receive.ino
@@ -65,20 +65,20 @@ void loop() {
     Serial.println(F("success!"));
 
     // print the data of the packet
-    Serial.print("[SX1262] Data:\t\t");
+    Serial.print(F("[SX1262] Data:\t\t"));
     Serial.println(str);
 
     // print the RSSI (Received Signal Strength Indicator)
     // of the last received packet
-    Serial.print("[SX1262] RSSI:\t\t");
+    Serial.print(F("[SX1262] RSSI:\t\t"));
     Serial.print(lora.getRSSI());
-    Serial.println(" dBm");
+    Serial.println(F(" dBm"));
 
     // print the SNR (Signal-to-Noise Ratio)
     // of the last received packet
-    Serial.print("[SX1262] SNR:\t\t");
+    Serial.print(F("[SX1262] SNR:\t\t"));
     Serial.print(lora.getSNR());
-    Serial.println(" dBm");
+    Serial.println(F(" dBm"));
 
   } else if (state == ERR_RX_TIMEOUT) {
     // timeout occurred while waiting for a packet
diff --git a/examples/SX126x/SX126x_Receive_Interrupt/SX126x_Receive_Interrupt.ino b/examples/SX126x/SX126x_Receive_Interrupt/SX126x_Receive_Interrupt.ino
index 20adb353..107b2d38 100644
--- a/examples/SX126x/SX126x_Receive_Interrupt/SX126x_Receive_Interrupt.ino
+++ b/examples/SX126x/SX126x_Receive_Interrupt/SX126x_Receive_Interrupt.ino
@@ -1,10 +1,10 @@
 /*
-   RadioLib SX126x Receive with Inerrupts Example
+   RadioLib SX126x Receive with Interrupts Example
 
    This example listens for LoRa transmissions and tries to
    receive them. Once a packet is received, an interrupt is
    triggered. To successfully receive data, the following
-   settings have to be the same on both transmitter 
+   settings have to be the same on both transmitter
    and receiver:
     - carrier frequency
     - bandwidth
@@ -44,10 +44,10 @@ void setup() {
     while (true);
   }
 
-  // set the function that will be called 
+  // set the function that will be called
   // when new packet is received
   lora.setDio1Action(setFlag);
-  
+
   // start listening for LoRa packets
   Serial.print(F("[SX1262] Starting to listen ... "));
   state = lora.startReceive();
@@ -98,39 +98,39 @@ void loop() {
 
     // reset flag
     receivedFlag = false;
-    
+
     // you can read received data as an Arduino String
     String str;
     int state = lora.readData(str);
-  
+
     // you can also read received data as byte array
     /*
       byte byteArr[8];
       int state = lora.receive(byteArr, 8);
     */
-    
+
     if (state == ERR_NONE) {
       // packet was successfully received
       Serial.println(F("[SX1262] Received packet!"));
-  
+
       // print data of the packet
       Serial.print(F("[SX1262] Data:\t\t"));
       Serial.println(str);
-  
-      // print RSSI (Received Signal Strength Indicator) 
+
+      // print RSSI (Received Signal Strength Indicator)
       Serial.print(F("[SX1262] RSSI:\t\t"));
       Serial.print(lora.getRSSI());
-      Serial.println(" dBm");
-  
-      // print SNR (Signal-to-Noise Ratio) 
+      Serial.println(F(" dBm"));
+
+      // print SNR (Signal-to-Noise Ratio)
       Serial.print(F("[SX1262] SNR:\t\t"));
       Serial.print(lora.getSNR());
       Serial.println(F(" dBm"));
-  
+
     } else if (state == ERR_CRC_MISMATCH) {
       // packet was received, but is malformed
       Serial.println(F("CRC error!"));
-  
+
     }
 
     // we're ready to receive more packets,
diff --git a/examples/SX126x/SX126x_Settings/SX126x_Settings.ino b/examples/SX126x/SX126x_Settings/SX126x_Settings.ino
index 441db9c3..d6daf6d7 100644
--- a/examples/SX126x/SX126x_Settings/SX126x_Settings.ino
+++ b/examples/SX126x/SX126x_Settings/SX126x_Settings.ino
@@ -23,8 +23,13 @@
 // SX1268 module is in slot A on the shield
 SX1268 loraSX1268 = RadioShield.ModuleA;
 
-// SX1262 module is in slot B on the shield
-SX1262 loraSX1262 = RadioShield.ModuleB;
+// if you're not using RadioShield, you can specify
+// the connection yourself
+// NSS pin:   6
+// DIO1 pin:  4
+// DIO2 pin:  5
+// BUSY pin:  7
+SX1262 loraSX1262 = new Module(6, 4, 5, 7);
 
 void setup() {
   Serial.begin(9600);
@@ -51,7 +56,7 @@ void setup() {
 
   // initialize the second LoRa instance with
   // non-default settings
-  // this LoRa link will have high data rate, 
+  // this LoRa link will have high data rate,
   // but lower range
   Serial.print(F("[SX1262] Initializing ... "));
   // carrier frequency:           915.0 MHz
@@ -130,14 +135,14 @@ void setup() {
     while (true);
   }
 
-  // Some SX126x have TCXO (temprature compensated crystal
+  // Some SX126x have TCXO (temperature compensated crystal
   // oscillator). To configure TCXO reference voltage,
   // the following method can be used.
   if (loraSX1268.setTCXO(2.4) == ERR_INVALID_TCXO_VOLTAGE) {
     Serial.println(F("Selected TCXO voltage is invalid for this module!"));
     while (true);
   }
-  
+
 
   Serial.println(F("All settings succesfully changed!"));
 }
diff --git a/examples/SX126x/SX126x_Transmit/SX126x_Transmit.ino b/examples/SX126x/SX126x_Transmit/SX126x_Transmit.ino
index cb899eb8..e6060e58 100644
--- a/examples/SX126x/SX126x_Transmit/SX126x_Transmit.ino
+++ b/examples/SX126x/SX126x_Transmit/SX126x_Transmit.ino
@@ -58,20 +58,20 @@ void loop() {
 
   if (state == ERR_NONE) {
     // the packet was successfully transmitted
-    Serial.println(" success!");
+    Serial.println(F(" success!"));
 
     // print measured data rate
-    Serial.print("[SX1262] Datarate:\t");
+    Serial.print(F("[SX1262] Datarate:\t"));
     Serial.print(lora.getDataRate());
-    Serial.println(" bps");
+    Serial.println(F(" bps"));
 
   } else if (state == ERR_PACKET_TOO_LONG) {
     // the supplied packet was longer than 256 bytes
-    Serial.println(" too long!");
+    Serial.println(F(" too long!"));
 
   } else if (state == ERR_TX_TIMEOUT) {
     // timeout occured while transmitting packet
-    Serial.println(" timeout!");
+    Serial.println(F(" timeout!"));
 
   }
 
diff --git a/examples/SX126x/SX126x_Transmit_Interrupt/SX126x_Transmit_Interrupt.ino b/examples/SX126x/SX126x_Transmit_Interrupt/SX126x_Transmit_Interrupt.ino
index 6a97fd9b..1c4e0508 100644
--- a/examples/SX126x/SX126x_Transmit_Interrupt/SX126x_Transmit_Interrupt.ino
+++ b/examples/SX126x/SX126x_Transmit_Interrupt/SX126x_Transmit_Interrupt.ino
@@ -1,5 +1,5 @@
 /*
-   RadioLib SX126x Transmit with Inerrupts Example
+   RadioLib SX126x Transmit with Interrupts Example
 
    This example transmits LoRa packets with one second delays
    between them. Each packet contains up to 256 bytes
@@ -40,7 +40,7 @@ void setup() {
     while (true);
   }
 
-  // set the function that will be called 
+  // set the function that will be called
   // when packet transmission is finished
   lora.setDio1Action(setFlag);
 
@@ -57,7 +57,7 @@ void setup() {
                       0x78, 0xAB, 0xCD, 0xEF};
     state = lora.transmit(byteArr, 8);
   */
-  
+
   if (state != ERR_NONE) {
     Serial.print(F("failed, code "));
     Serial.println(state);
@@ -86,7 +86,7 @@ void loop() {
     // you can transmit C-string or Arduino string up to
     // 256 characters long
     int state = lora.startTransmit("Hello World!");
-  
+
     // you can also transmit byte array up to 256 bytes long
     /*
       byte byteArr[] = {0x01, 0x23, 0x45, 0x56,
@@ -97,7 +97,7 @@ void loop() {
     // NOTE: when using interrupt-driven transmit method,
     //       it is not possible to automatically measure
     //       transmission data rate using getDataRate()
-    
+
     if (state != ERR_NONE) {
       Serial.print(F("failed, code "));
       Serial.println(state);