From 085d496b8806f9e3b88202d0b58ac348b7e2e7c0 Mon Sep 17 00:00:00 2001
From: jgromes <jgromes@users.noreply.github.com>
Date: Mon, 13 May 2019 15:42:18 +0200
Subject: [PATCH] [SX126x] Added transmit example

---
 .../SX126x_Transmit/SX126x_Transmit.ino       | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 examples/SX126x/SX126x_Transmit/SX126x_Transmit.ino

diff --git a/examples/SX126x/SX126x_Transmit/SX126x_Transmit.ino b/examples/SX126x/SX126x_Transmit/SX126x_Transmit.ino
new file mode 100644
index 00000000..7c452520
--- /dev/null
+++ b/examples/SX126x/SX126x_Transmit/SX126x_Transmit.ino
@@ -0,0 +1,79 @@
+/*
+   RadioLib SX126x Transmit Example
+
+   This example transmits packets using SX1262 LoRa radio module.
+   Each packet contains up to 256 bytes of data, in the form of:
+    - Arduino String
+    - null-terminated char array (C-string)
+    - arbitrary binary data (byte array)
+
+   Other modules from SX126x family can also be used.
+*/
+
+// include the library
+#include <RadioLib.h>
+
+// SX1262 module is in slot A on the shield
+SX1262 lora = RadioShield.ModuleA;
+
+void setup() {
+  Serial.begin(9600);
+
+  // initialize SX1262 with default settings
+  Serial.print(F("[SX1262] Initializing ... "));
+  // carrier frequency:           434.0 MHz
+  // bandwidth:                   125.0 kHz
+  // spreading factor:            9
+  // coding rate:                 7
+  // sync word:                   0x1424 (private network)
+  // output power:                14 dBm
+  // current limit:               60 mA
+  // preamble length:             8 symbols
+  int state = lora.begin();
+  if (state == ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+    while (true);
+  }
+}
+
+void loop() {
+  Serial.print(F("[SX1262] Transmitting packet ... "));
+
+  // you can transmit C-string or Arduino string up to
+  // 256 characters long
+  // NOTE: transmit() is a blocking method!
+  //       See example SX126x_Transmit_Interrupt for details
+  //       on non-blocking transmission method.
+  int state = lora.transmit("Hello World!");
+
+  // you can also transmit byte array up to 256 bytes long
+  /*
+    byte byteArr[] = {0x01, 0x23, 0x45, 0x56, 0x78, 0xAB, 0xCD, 0xEF};
+    int state = lora.transmit(byteArr, 8);
+  */
+
+  if (state == ERR_NONE) {
+    // the packet was successfully transmitted
+    Serial.println(" success!");
+
+    // print measured data rate
+    Serial.print("[SX1262] Datarate:\t");
+    Serial.print(lora.getDataRate());
+    Serial.println(" bps");
+
+  } else if (state == ERR_PACKET_TOO_LONG) {
+    // the supplied packet was longer than 256 bytes
+    Serial.println(" too long!");
+
+  } else if (state == ERR_TX_TIMEOUT) {
+    // timeout occured while transmitting packet
+    Serial.println(" timeout!");
+
+  }
+
+  // wait for a second before transmitting again
+  delay(1000);
+}